SKVTechnik is reported to the use of side channel compressors in industry and trade. Today the use of side channel compressors in conveyor systems. Air is the conveying principle and establishing a funding system may be able to carry solids or to carry. This principle is already known from the nature. Air as a carrier medium can absorb large amounts of solids.
This can be, for example, sand or snow. Also seeds and leaves from can take from the air. In the technical application, grain from ships by means of pneumatic conveying systems have been unloaded already before the turn of the century. Pneumatic conveyors are moving air as a carrier medium for the promotion of solids to use. Within a pipe an air current produced with one or several side channel compressors, which acts as a support medium for solids.
The pressure difference between the beginning and the end of the pipe evokes this airflow. Now granular material in the suction procedure pneumatically supported, then that is Pumping height is almost unlimited. The following is entered on physical principles of promoting pneumatic pressure conveyors and conveying systems. Conveying systems: A fan creates a vacuum in a pipe system. This fan is positioned at the end of the suction line. The material to be pumped is recorded at the beginning of the suction line. Then it is transported through the pipeline to the so-called separators. The separator is used for separation of material and air. Before the fan, usually have a filter is turned on, which cleans the air. By means of this principle can be promoted by several intakes to a delivery point. Druckforderanalagen: The air is sucked from the environment and pressed in a pipe system. Unlike Saugforderanalagen, the goods to be transported at a particular point is recorded at Druckforderanalagen and can be delivered in different places.